EMC2-271MP 10G Rolling Shutter CMOS
A rugged camera with an astounding 271 million pixels!
The EMC2-271 Rolling Shutter CMOS is available in color and monochrome versions
and is designed for use in machine vision, embedded systems, industrial applications, and document imaging applications.
Especially designed for high performance applications, the EMC2-271 weighs approx. 550 grams (with F-Mount).
The EMC2-271 uses the Gpixel GMAX15271BSI CMOS sensors in full frame format. The camera features a dynamic range of 74 dB.
in 12bit mode at 2.8fps at full resolution. in 8bit mode at 4.2fps at full resolution.
Higher frame rates can be achieved in ROI/windowing mode and other run modes.
The EMC2-271 is available in 10GigE output.
Product Highlights
- 19,376 x 14,000 1.5μm active pixels
- Imaging area 29.1 x 21.0 mm | ~35.89mm diagonal
- Rolling shutter CMOS: Dynamic Range 73.8dB (14 bit mode)
- Global reset exposure for strobed applications.
- Peak QE: 76.7% (520 nm)
- Flat Field and Shading Correction
- Windowing ROI capability
- Field Updatable Firmware and Extensive Built In Test (BIT)
- Lens Mount Options: M58, Nikon F, Nikon Z (Passive), Canon EF, Canon RF, OEM/custom lens mounts
Technical Information
CONNECTIONS
The pin table and connector image reference the camera connector as viewed from the camera back. The mating connector manufacturer and part number are Hirose HR10A-7P-6P.
DRAWINGS
Sensor Graphs
Filter Graphs
Power Supply
Recommended 10 GigE Vision Frame Grabbers and Capture Cards:
Innodisk EGPL-T102: M.2 2280 10 GbE Card
Asus XG-C100C: 10G Ethernet Network Card
Gidel HawkEye-20GigE: Dual 10 GigE Vision frame grabber and FPGA image processing
Gidel FantoVision20-GigE